Remove oil stains from your garage and driveway with a strong, natural degreaser plus absorbent.

Pour-N-Restore Oil Stain Remover lifts and absorbs embedded oil stains as it dries from a liquid to a powder. This is made possible by combining a powerful citrus degreaser with a non-leaching absorbent. The formula is biodegradable, phosphate-free, and has a fresh orange fragrance. Coverage is approximately 24 sq.ft. per gallon.

Oil Stain Remover Features:

Lifts & absorbs stains

No scrubbing, rinsing, or mess

Citrus based, biodegradable, phosphate-free

What Makes Pour-N-Restore® So Great?

Pour-N-Restore® Oil Stain Remover is superior to conventional degreasers because it combines a powerful citrus degreaser with a non-leaching absorbent to create Micro-Extraction Technology™.

Conventional degreasers soak into concrete and masonry, but only the surface gets scrubbed and rinsed. After rinsing, the remaing degreaser residue begins to evaporate, drawing the stain back to the surface.

Pour-N-Restore® also soaks deep into concrete and masonry, but the Micro-Extraction Technology™ allows it to encapsulate oil molecules and extract the entire stain to the surface. Pour-N-Restore® then absorbs the entire stain as it dries to a powder.

Pour-N-Restore® not only removes oily stains for eye appeal, it can also be used as a prep for sealers, epoxy or other coatings. Oil residue causes coatings to release, so complete removal is a necessity.

Where Can I Use Pour-N-Restore®

It may be used on a variety of concrete or masonry surfaces, including cement, exposed aggregate, quarry tile, stone, patio blocks, paving bricks and colored concrete. Do not use on asphalt (blacktop). Pour-N-Restore® is ideal for use on garage floors, driveways, sidewalks, patios, parking lots, drive-thru's, manufacturing floors, warehouse floors and other concrete and masonry surfaces.

What Stains does Pour-N-Restore® Remove?

The powerful cleaner will effectively remove a variety of hydrocarbon stains including: motor oil, grease, hydraulic fluid, anti-freeze, brake fluid, transmission fluid, power steering fluid, synthetic oils, food grease from animal fats, cooking oil, tar, citronella oil and wax.

Pour-N-Restore® Cleaning Tips:

Always test spot on an inconspicuous area before treatment. This insures painted surfaces are color fast and checks compatibility with sealers.

Get greater coverage and accelerate dry time by using a plastic spreader. This is particularly useful in climates that experience cooler temperatures or high humidity.

For best results, use Pour-N-Restore® when the temperature is above 60°F. At this temperature, Pour-N-Restore will dry in about 5-8 hours. If it is used in cooler temperatures, dry time may be extended significantly and performance may be inhibited.

For best results, provide maximum ventilation. The product will not dry quickly if the treated area is poorly ventilated. If you are treating a stain inside a garage or other enclosure, open as many doors and windows as possible. A fan will also accelerate drying time.

While we do not recommend scrubbing Pour-N-Restore on the first application, scrubbing may enhance performance if subsequent applications are required. This may be the case with old, dry stains, heavy stains, tar and wax residue and stains previously treated with other products.

AWARDS!

Handyman Club of America

Pour-N-Restore was tested and evaluated by 250 members of the Handyman Club of America. Typically, products that are tested by club members receive an approval rating near 66%. Pour-N-Restore's approval rating was 85%!

World of Concrete

At the World of Concrete Show, Pour-N-Restore was selected as one of 5 products to be considered for the "Most Innovative Product in the Masonry Cleaning & Repair" category. Attendees voted for the most innovative product and Pour-N-Restore was the winner!