Microfiber Buffing Pads!
Our newest Microfiber detailing tool is the most unusual we've seen. This revolutionary fiber shampooing & polishing material resembles thick, fine hair. The independent, non-tufted vertical fibers work like the fingers on your hand. They flex or stiffen when necessary to reach the peaks and valleys. This constant flexing and stiffening action produces an even application of wax and consistent results from polishing.
The Microfiber Hair produces depth and brilliance of shine seldom found with hours of normal polishing. The micro-hairs also trap and hold polishes and waxes close to the surface. This saves time and money by spreading products instead of absorbing them.
The pads are awesome on paint, aluminum, Fiberglass, plastic, glass, tile, wood, and smooth fabrics. This makes them ideal for any type or size vehicle, or home use.
The independent, non-tufted vertical fibers work like the fingers on your hand. They flex or stiffen when necessary to reach the peaks and valleys found in wood, painted or other solid surfaces. This constant flexing and stiffening action produces uniform results over the entire surface, adding depth and brilliance of shine not found in other products.
The patented Microfiber independent fibers also trap and hold finishing agents close to the surface while spinning and oscillating at high rates of speed to produce a finish that is more uniform and consistent than a hand-rubbed finish.
The Microfiber Difference
Cleaning for On-The-Go Operations
For cleaning the fibers for on-the-go operations, hold a pocket comb or soft brush lightly against the the MicroFingers® fibers while the machine is running. Repeat this process as you start to see the fibers clog up and begin laying over.
Cleaning Pads After Each Use
Always clean pads immediately after use. Waxes that are designed to give a quick shine, like a spray-on/wipe-off wax can be cleaned from the pad using dish soap. Rinse the pad thoroughly and squeeze out the excess moisture. Pat dry with a towel, then allow the pad to air dry. Place the pad(s) in a plastic bag or back in the original package to protect them for future use
